Skip to content
IndustrialImaging

Published November 21, 2026

Weld testing labs and what weld testing costs per specimen

A weld testing lab cuts specimens from a test weld and breaks, bends, etches or measures them, then issues a report that qualifies a welding procedure or a welder. For a single plate procedure qualification in the US, expect roughly $900 to $1,900 for specimen preparation, tests and the report, before shipping the coupons. Production welds in the field are a different job, tested by NDT crews with ultrasonic, radiographic or magnetic particle methods, and the two are priced very differently.

Weld testing labs and what weld testing costs per specimen

Weld testing lab prices by test

These are planning ranges built from how US labs structure quotes, not published price lists. Real quotes move with material, thickness, accreditation, rush time and minimum order, so use the table to read a quote line by line.

TestPlanning rangeWhat it proves
Reduced section tensile $75 to $150 per specimen Weld strength against the base metal requirement
Guided bend (face, root or side) $50 to $100 per specimen Soundness and ductility, no open defects
Macro etch and photo $75 to $150 per specimen Fusion, penetration and weld profile
Charpy impact set of three $150 to $350 per set, more at low temperatures Toughness at the design temperature
Hardness traverse $150 to $300 per sample Heat affected zone hardness, sour service limits
Specimen machining and prep $200 to $450 per coupon set Cutting and machining to the code dimensions
Test report and certification $100 to $250 Signed results for the PQR or welder file
Fillet weld fracture or break test $40 to $90 per specimen Fusion and root soundness of fillets

Labs often set a minimum charge per job, so a single bend test is not priced by the table. Rush work in 1 to 2 days typically carries a surcharge, and accredited labs such as those holding ISO/IEC 17025 for the test method price higher than a shop bench.

Worked budget for one procedure qualification

A fabricator qualifies a 3/4 inch carbon steel plate procedure to AWS D1.1 for a structural job. The coupon is welded in house and sent to the lab.

  • Specimen cutting and machining for the coupon set, about $200 to $450.
  • Two reduced section tensile tests at $75 to $150 each, about $150 to $300.
  • Four guided bend tests (two face, two root) at $50 to $100 each, about $200 to $400.
  • One macro etch at $75 to $150.
  • One Charpy set of three if the job calls for toughness, about $150 to $350.
  • Test report for the procedure qualification record, about $100 to $250.

Added together the range is about $875 to $1,900, so plan on roughly $900 to $1,900 and ask for the machining line separately, because it moves the most between labs. A welder qualification test is cheaper, often two bends and a visual, but the shop still pays for the coupon, the welder time and the inspector.

What drives the price of weld testing

  • Material and thickness. Stainless, duplex and thick plate cost more to machine and test.
  • Code. ASME Section IX, AWS D1.1 and API 1104 specify different specimen sets, so the count changes.
  • Accreditation. Labs accredited to ISO/IEC 17025 or approved by a certifying body charge more and give reports an owner will accept.
  • Turnaround. Standard lead time is days to two weeks, rush adds a premium.
  • Shipping. Coupons are heavy and a lost coupon means welding it again, so ship them insured.
  • Witnessing. An inspector present at the cutting or the test adds a day rate.

If your welds are already in a vessel, pipe or structure, you want NDT instead, and the price logic is per weld or per day. See phased array weld inspection vs radiography for a 200 weld budget and CWI inspection cost for the visual inspection side.

When you need a weld testing lab and when you need NDT

Use a lab when the question is whether a procedure or a welder can produce a sound weld: qualification coupons, toughness, hardness and corrosion tests. Use field NDT when the question is whether this weld in this vessel or pipe is sound. Ultrasonic, radiographic, magnetic particle and penetrant testing leave the weld intact and are covered by the pipe weld inspection and structural steel inspection services. Many projects need both, a lab report to qualify the procedure and NDT crews for production welds. Training new welders also takes time, and a video of a bend test can be turned into a short quiz for the crew with a tool such as Vidquiz.

What to put in your weld testing request for quote

  • Code and edition (ASME IX, AWS D1.1, API 1104) and the procedure or welder test scope.
  • Material grade, thickness and diameter of the coupons, and the number of coupon sets.
  • Tests required: tensile, bend, macro, Charpy with temperature, hardness.
  • Accreditation or approval the owner demands for the lab.
  • Turnaround, shipping method and who machines the specimens.
  • If production welds are included, count, thickness and the NDT methods required.

How much does weld testing cost?

Lab tests run about $50 to $350 per specimen depending on the test, and a procedure qualification often totals $900 to $1,900 with machining and the report. Field NDT of production welds is priced per weld or per crew day, from about $40 per weld to $3,000 or more per day.

What is the difference between a weld testing lab and an NDT company?

A weld testing lab destroys or sections test coupons to qualify a procedure or welder. An NDT company inspects finished welds without damaging them, in a plant or in the field. Fabricators often use both, a lab for qualification and an NDT crew for production inspection.

Do I need an accredited weld testing lab?

Check what the owner, code or customer requires. Many structural and pressure projects accept a lab that is qualified under the contractor quality program, while others require ISO/IEC 17025 accreditation. Ask the lab for its scope of accreditation for each test you need.

How long does weld testing take?

Standard turnaround for a coupon set is a few days to two weeks, depending on machining and queue, and rush service in one to two days costs more. Charpy and corrosion tests take longer. Plan the coupon weld and shipping into the schedule before the production welding begins.

Where do I find weld testing near me?

Search for labs accredited for the tests you need and compare quotes on one scope. A request through the inspection method advisor goes to NDT and testing companies in your region, so you compare line by line instead of calling each lab.