Skip to content
IndustrialImaging

Crane inspection services for overhead, bridge and mobile cranes

Crane inspection services combine a documented visual and functional inspection with non destructive testing of the parts that fail without warning: hooks, welds on girders and end trucks, pins, sheaves and wire rope. Plants buy them for the annual or periodic inspection required by OSHA and ASME B30, after a repair or alteration, before a load test, and when a crane is bought, leased or put back in service. Describe the crane once, state the capacity and the number of units, and the request goes to inspection companies that cover your state and run the NDT methods you need.

Crane inspection services for overhead, bridge and mobile cranes
01

What a crane inspection job covers

ItemMethodWhat it findsTypical trigger
Hooks and hook blocks Magnetic particle testing, visual gauging of throat opening Cracks at the saddle and shank, spread, wear Annual inspection, hook damage, after overload
Girder, end truck and trolley welds Visual, magnetic particle, ultrasonic on critical joints Fatigue cracks at stiffeners, cover plate ends and brackets Periodic inspection, cracks found, age over 20 years
Runway beams and rail Visual, rail wear gauging, weld checks Rail wear, loose clips, cracked splices Periodic inspection, alignment problems
Wire rope Visual, electromagnetic rope testing on long ropes Broken wires, corrosion, loss of metallic area Frequent and periodic inspection, discard check
Sheaves, drums, pins, shafts Visual, magnetic particle, ultrasonic on shafts Groove wear, cracks, bent or worn pins Rebuild, noise, hoist repair
Brakes, limit switches, controls Functional test Slip, wrong travel limits, failed interlocks Every periodic inspection
Rated load Load test at the code percentage of rated load Deflection, brake holding, structural distress After repair or alteration, new or reinstalled cranes

Not every crane needs every line. A bridge crane in a clean machine shop may need a visual and functional inspection plus a hook magnetic particle check, while a steel mill crane with heavy duty cycles justifies weld testing on the girders. For the methods themselves see magnetic particle inspection and ultrasonic testing services.

02

Where the inspection requirement comes from

For general industry overhead and gantry cranes the base rule is OSHA 1910.179, which sets frequent and periodic inspections and a rated load test after alterations. ASME B30.2 covers overhead and gantry cranes in detail, B30.5 mobile cranes and B30.10 hooks, and construction cranes fall under OSHA 1926 Subpart CC. The periodic inspection is performed by a qualified person and documented, and the records are what an insurer or an OSHA inspector asks for first. NDT adds the crack evidence that a visual inspection cannot give, so many owners add hook and weld testing to the annual scope.

03

Who buys crane inspection services

  • Plant and maintenance managers with several overhead cranes and an annual inspection date to hold.
  • Steel, foundry and paper mills where heavy duty crane welds and hooks need crack testing, not just a walk around.
  • Warehouse and fabrication shop owners who inherited cranes without inspection records.
  • Rental yards and contractors reinstalling or relocating a crane who need a documented inspection and load test.
  • Buyers of a used crane who want crack testing and a condition report before closing.
  • Risk managers whose insurer asks for a third party inspection after an incident or overload.
04

How a crane inspection job runs

  1. You send the crane list: type, capacity, span, age, duty class, location and the date of the last inspection report.
  2. The provider confirms access, lockout rules, lift equipment and whether the crane can be taken out of service for a day.
  3. The inspector reviews records, inspects the structure, hoist, trolley, brakes and controls, and runs the NDT you scoped.
  4. Findings are rated as immediate repair, repair at next outage or monitor, with photos and NDT results.
  5. You get a written report for the crane file, and the load test, if required, is scheduled once repairs are done.
05

What drives the price of crane inspection services

  • Number of cranes in one visit. Three cranes in one bay cost far less per crane than three single visits.
  • Capacity and span. Large bridge cranes take longer and need lift access to the girders.
  • NDT scope. Hook magnetic particle testing adds an hour or two per crane, weld testing on girders adds a day or more.
  • Cleaning and access. Hooks and welds covered in grease or paint need cleaning before testing.
  • Load test. Test weights, rigging and crane time are priced apart from the inspection.
  • Travel and minimums. A single small crane in a remote plant is priced mostly by the trip.

For the wider range of method costs see NDT inspection cost, and for weld crack testing prices see our weld testing labs and cost guide.

06

What to put in your crane inspection request for quote

RFQ
Draft
  • 01Crane type (top running bridge, gantry, monorail, jib, mobile), capacity and span.
  • 02Count of cranes, building and location, and access to the runway.
  • 03Manufacturer, age and duty class if known, plus past inspection and repair records.
  • 04Whether the quote should include hook MT, weld testing, wire rope testing or a load test.
  • 05Operating restrictions: shutdown window, production schedule, hot work and confined space rules.
  • 06Report format required by your insurer or corporate safety program.
07

How to choose a crane inspection company

Ask who performs the periodic inspection and what qualification they hold, since the standard requires a qualified person, and ask for the NDT personnel certification practice (SNT-TC-1A or CP-189 level II is the usual floor). Request a sample report that shows photos, findings with severity and the NDT data. A company that only does visual inspection cannot confirm a hook crack, so match the scope to the crane. Prefer a quote that lists inspection, each NDT method and the load test as separate lines, so two quotes compare line by line.

08

FAQ

How often does a crane need to be inspected?

Frequent inspections are visual checks by the operator or a designated person, daily to monthly depending on the part and the duty. Periodic inspections by a qualified person are required at intervals up to a year under OSHA 1910.179 and ASME B30.2, and heavy duty cranes need them more often.

Do crane hooks need magnetic particle testing?

The standards require hook inspection for cracks, wear and throat opening, and many owners use magnetic particle testing to confirm cracks that a visual check can miss. Hooks that show cracks, deformation or a spread throat opening are removed from service, not repaired by welding.

What is a crane load test?

A load test lifts a test weight, commonly 125 percent of rated load for overhead cranes after repair or alteration, to check structure, brakes and hoist under load. It is not a substitute for inspection and is done only after the inspection finds the crane fit to test.

Can the same company inspect and repair a crane?

Many can, but an independent inspector avoids a conflict when the report decides how much repair you buy. Some plants use one company for inspection and NDT and another for repairs. State your preference in the request so quotes arrive in the structure you want.

What does crane inspection cost?

Cost depends on the number of cranes, capacity, NDT scope and travel. Several cranes in one visit are cheaper per crane, and adding weld testing or a load test increases the price. A request through the advisor gets you quotes for your own crane list.

Get matched with crane inspection companies

Open the inspection method advisor, enter the cranes, capacities and the NDT you want, and it builds a complete request for quote for NDT companies in your region. You compare quotes on the same scope instead of repeating the crane data to each company. Browse every method on the NDT companies page, or see related structural work on structural steel inspection services.

Inspection request sheet
01What needs inspecting
...
02Material
...
04Concern
...

Run an NDT company? List your company

Show your crane inspection, magnetic particle and weld testing crews and the states you cover, and receive crane inspection requests that fit your equipment and certifications. Learn more for providers.